115年 - 機車駕照筆試_英文 201-250（2026/01 更新）#144928

201. If a passenger on a motorcycle is not wearing a helmet, (A) the driver ispenalized (B) the passenger is penalized (C) no penalty is imposed.

202.Which of the following statements is correct? (A) When the tread surface islevel with the tire wear indicator, it means the tire needs to be replaced. (B)When the tread surface is perpendicular to the tire wear indicator, it meansthe tire needs to be replaced. (C) When the tread depth at any point on themotorcycle tire reaches 1.6 millimeters, it means the tire needs to bereplaced.

203. Which of the following is NOT a necessary action before starting to ride? (A)Check the lights (B) Confirm tire pressure (C) Warm up the engine.

204.Regarding motorcycle rearview mirrors, which statement is incorrect? (A) Mostare convex mirrors (B) They help riders monitor the situation behind thevehicle (C) If the rearview mirror cannot properly observe the rear while riding,it should be adjusted immediately during riding.

205.Regarding motorcycle kickstands, which statement is incorrect? (A) They canbe divided into main stand and side stand (B) They are parts that requirefrequent replacement (C) The side stand is less stable and is onlyrecommended for short-term parking.

206.Which of the following statements about motorcycle turn signals is incorrect?(A) Used to alert vehicles in front and behind that the motorcycle intends toturn in a certain direction (B) The light color should be amber (C) Whether tosignal before turning can be decided based on road conditions

207.Which of the following about basic motorcycle accessories and functions iscorrect? (A) Rearview mirrors hinder smooth weaving through traffic and canbe removed if necessary (B) The headlight includes both high beam and lowbeam (C) Rearview mirrors are convex mirrors

208. If a motorcycle tire blows out while riding, the first action should be: (A) Brakeimmediately (B) Release the throttle (C) Turn the handlebars

209.Which of the following motorcycle modifications violate regulations? (A)Installing high-intensity HID headlights without authorization (B) Raising theexhaust pipe upwards (C) Both of the above violate regulations

210.Principles for selecting a safety helmet: (A) The tighter the better to prevent itfrom being blown off (B) Choose a dark color because it is less likely to getdirty (C) None of the above

211. Which of the following will NOT be displayed on a motorcycle dashboard? (A)High beam indicator (B) Tire wear indicator (C) Vehicle speed indicator.

212.Which of the following is NOT a primary function of a motorcycle suspensionsystem? (A) Reduce tire wear (B) Increase engine power (C) Enable safer andmore comfortable vehicle handling.

213.Motorcycle braking methods should be adjusted according to externalconditions. On dry or downhill roads, which braking method is recommended?(A) Front brake as primary, rear brake as secondary (B) Rear brake asprimary, front brake as secondary (C) Even distribution between front and rearbrakes.

214.Motorcycle braking methods should be adjusted according to externalconditions. On slippery or uphill roads, which braking method isrecommended? (A) Front brake as primary, rear brake as secondary (B) Rearbrake as primary, front brake as secondary (C) Even distribution between frontand rear brakes.

215.When replacing a motorcycle battery, first turn the main switch key to the"OFF" position, then remove the battery. What is the correct sequence? (A)Remove the negative cable first, then the positive cable (B) Remove thepositive cable first, then the negative cable (C) Either sequence is acceptable.

216. If the air filter accumulates dust, it causes: (A) reduced horsepower (B)increased fuel consumption (C) both of the above.

217.

(A) Vehicle width restriction (B) No parking (C) Vehicle height restriction.

218.

(A) Vehicle length restriction (B) Vehicle width restriction (C) No entry for cars.

219.

(A) Stop and then proceed (B) Stop for inspection (C) No pedestrian crossing.

220.

(A) Stop and then proceed (B) Stop for inspection (C) No passage.

221.When riding a motorcycle, besides checking for fuel, which of the followingstatements is correct? (A) No additional basic maintenance is needed. (B)Basic maintenance is required to ensure the vehicle's condition. (C) Only thetire tread depth needs to be checked.

222.If a motorcycle produces abnormal noises when braking, which of thefollowing statements regarding handling is correct? (A) If the noise occurs onlyin wet weather and the brakes function normally, it is considered normal andrequires no special action. (B) The motorcycle should be taken as soon aspossible to a certified shop for a professional technician to inspect the brakesystem, identify the cause of the abnormality, and perform necessary repairs.(C) You can check the brake pad thickness yourself, and if it has not worndown to the warning line, there is no safety concern.

223.Before riding a motorcycle, a safety inspection should be conducted.Regarding the inspection items, which of the following statements is correct?(A) Mainly check the brakes and tires; as long as the braking system isnormal, it is safe to ride. (B) Since the motorcycle passed safety inspectionbefore leaving the factory, only periodic maintenance requires a full check. (C)Check the lights, turn signals, brakes, tires, horn, and rearview mirrors,ensuring all systems function properly.

224.Regarding safety helmet precautions, which of the following statements isincorrect? (A) A helmet that has been subjected to impact can still be usednormally if the exterior shows no damage, without replacement. (B) The chinstrap length should not be too long or too short, leaving about one finger'swidth of space. (C) The buckle should be under the chin, leaving one finger'sspace, and the knob should be tightened.

225.When a motorcycle rider and passenger wear a safety helmet, regarding thefastening of the chin strap, which of the following statements is correct? (A)After fastening the strap, leave about one to two finger-widths of slack tobalance comfort and ventilation. (B) The helmet should be worn facing forwardand the chin strap securely fastened, ensuring the helmet fits snugly on thehead. (C) For short trips or low-speed riding, the strap only needs to be lightlyfastened and does not need to be tight.

226.Regarding the selection of a motorcycle safety helmet, which of the followingstatements is correct? (A) When choosing a helmet, comfort and ventilationshould be the primary considerations. (B) Select a helmet that bears thecommodity inspection mark from the Bureau of Standards, Metrology andInspection (BSMI) to ensure it meets safety standards. (C) Imported brandhelmets that pass international safety certifications have stricter protectiveperformance than domestic standards and can be safely chosen.

227.Regarding modification or alteration of motorcycle lights, which of thefollowing statements is correct? (A) Applying a transparent protective film tothe lights to prevent scratches, as long as it does not affect brightness, iscompliant. (B) Installing high-brightness bulbs that have passed inspection toimprove nighttime illumination is compliant. (C) Lights must not be painted,covered with tape, or fitted with additional covers, as this may affect visibilityand recognition.

228.Regarding regulations on modifying motorcycle exhaust pipes, which of thefollowing statements is correct? (A) Replacing with an exhaust pipe certifiedby the Environmental Protection Administration (EPA) and meeting emissionstandards complies with modification regulations. (B) Using the same modelOEM parts to replace the exhaust pipe position, without changingspecifications, complies with regulations. (C) The number and position ofexhaust pipes must not be changed, and the muffler or catalytic convertermust not be removed.

229.Before starting the motorcycle engine, which items should be checked? (A)Only the fuel level. (B) Only the engine oil level. (C) Both the engine oil andfuel levels.

230.When is the most accurate time to measure the engine oil level of amotorcycle? (A) Immediately after parking and turning off the engine. (B)When the motorcycle is tilted. (C) After the motorcycle has been stationary ona level surface for a period of time with the engine off.

231.Regarding motorcycle tire pressure, which of the following statements iscorrect? (A) The higher the tire pressure, the better. (B) Tire pressure shouldbe lower than the manufacturer's specification to increase grip. (C) Tirepressure should comply with the manufacturer's specifications, and treaddepth should be sufficient.

232.If a vehicle's tire pressure is "too high," which part of the tire tread will wearmost severely? (A) Both sides of the tread (B) The inner part of the tread (C)The center part of the tread

233. Which of the following on a motorcycle instrument panel is used to indicatethe accumulated mileage? (A) Odometer (B) Speedometer (C) Tachometer

234.When the motorcycle fuel gauge shows "E," what does it mean? (A) Fuel issufficient; you can continue riding. (B) Fuel is low; refuel as soon as possible.(C) Engine oil is low; add engine oil.

235.Regarding the periodic inspection regulations for large heavy motorcycles(over 250 c.c.), which of the following statements is correct? (A) After 1 yearfrom the date of manufacture, the motorcycle must be inspected at least oncea year. (B) Motorcycles less than 5 years from the year of manufacture areexempt from periodic inspections. (C) Motorcycles over 5 years from the dateof manufacture must be inspected every six months.

236.When riding a motorcycle at night, if an oncoming vehicle continuously useshigh beams causing glare, which of the following actions best ensuressafety? (A) Respond with high beams to signal the other driver to switch tolow beams (B) Slightly shift your gaze toward the right edge line, maintain asteady speed and lane position, and avoid looking directly at the oncominglights (C) Slow down and stop by the roadside, waiting for the oncomingvehicle to pass

237.The faster the driving speed, the longer the braking distance. If the speeddoubles, the braking distance will increase by (A) 2 times (B) 4 times (C) 8times.

238. As driving speed increases, the driver's field of vision becomes (A) unchanged(B) narrower (C) wider.

239. When driving through a waterlogged road section, you should (A) drive at alow speed (B) pass quickly (C) use the brakes frequently.

240.If you disagree with the determination of accident responsibility, you should(A) absolutely comply (B) apply for a review with the review authority (C) file acomplaint with the police.

241.Which of the following best represents the concept of defensive driving? (A)Even if you follow traffic rules yourself, you must still be cautious and guardagainst others violating rules and causing harm to you. (B) Choose a crashresistant vehicle model and enhance safety equipment. (C) Ride in the middleof the lane so that everyone can see you.

242.Regarding the description of safe following distance, which of the following isincorrect? (A) Because motorcycles have smaller bodies, the safe distancemaintained when following another vehicle at the same speed can beshortened compared to cars. (B) A safe distance should be maintained evenwhen stopped. (C) After being overtaken, you should slightly reduce speed toregain a safe distance.

243.Concerning "precautions when purchasing a safety helmet," which of thefollowing is incorrect? (A) It must have a certification label approved by theStandards Inspection Bureau. (B) If the helmet has experienced a strongimpact but shows no visible damage, it does not need to be replaced. (C)Helmets with bright colors or reflective materials should be chosen.

244.How should one appropriately select a motorcycle safety helmet? (A) Use aconstruction helmet, which is lightweight and well-ventilated. (B) Choose onewith a certification label approved by the Standards Inspection Bureau forbetter assurance. (C) Choose a dark-colored helmet because it is less likelyto get dirty.

245.Regarding the description of the "off-tracking" phenomenon, which of thefollowing is incorrect? (A) When a vehicle turns, the rear wheels shift inward.(B) Vehicles with longer wheelbases have greater off-tracking. (C) Passengercars do not have off-tracking.

246.How should a motorcycle rider properly operate when passing through asection of road with accumulated water? (A) Drive at low speed (B) Use thebrakes frequently (C) Pass through quickly.

247.Which of the following is "not" a dangerous behavior when riding amotorcycle? (A) Carrying a passenger on the rear seat (B) Participating in amotorcycle convoy racing at night (C) Going out at night after drinking at agathering.

248. When a vehicle is driving through a curve, the higher the speed, thecentrifugal force generated is (A) greater (B) smaller (C) unchanged.

249.When performing an emergency brake on a motorcycle, remember not tobrake too hard to lock the wheels, and instead adopt (A) releasing the throttleand controlling the rear brake (B) releasing the throttle and using both frontand rear brakes (C) releasing the throttle and controlling the front brake.

250. What is the proper elbow posture when riding a motorcycle? (A) Fullyextended forward (B) Close to the body (C) Extended outward.