阿摩線上測驗
登入
首頁
>
專業英文
>
114年 - 114-4 航海人員測驗_電技員:專業英文#133733
> 試題詳解
8. The tool of fig. is called:
(A) packing
(B) washer
(C) casher
(D) climper
答案:
登入後查看
統計:
尚無統計資料
相關試題
9. If the water tubes of air cooler are leakage all of the following things may happen except _______. (A) cooling water will flow into the air box (B) charge air temperature will go down a few degrees (C) cooling water will flow out of the drain pipe (D) the engine should operate at a low load, if the leaking tubes can be plugged
#3675302
10. The standard steel file has ______ cut into the working surface of the file.(A) Ceramic(B) Glass(C) Diamonds(D) Teeth
#3675303
11. A ______ is designed to save the lives of on board people in case of emergency at sea.(A) fire Extinguisher(B) fire detector(C) lifeboat(D) steam spray
#3675304
12. Adjustment of Fuel Injection Timing, translate to chinese is?(A) 噴油壓力之調整(B) 燃油噴射正時之調整(C) 燃油壓力調整(D) 噴油器檢查
#3675305
13. In follow Fig. Item 3 is _____device?(A) Feedwater drum(B) Downcomer tube(C) Steam drum(D) Water tube
#3675306
14. In follow Fig. Item 9 is _____device?(A) Feedwater drum(B) Downcomer tube(C) Steam drum(D) Superheater
#3675307
15. Which type of open-end spanner is often with different-sized opening at each end.(A) Single-ended(B) Double-ended(C) Trible-ended(D) Unicle-ended
#3675308
16. Ring spanners are often double-ended with_______ to improve access to the nut or bolt.(A) offset handles(B) upset handles(C) reset handles(D) hardset handles
#3675309
17. A _______ is a mechanical screw apparatus used to hold the work piece in order to perform works. (A) Lathe (B) Washer (C) Vise (D) Clamp
#3675310
18. Screw mainly used as a threaded fastener to _____ objects together.(A) cast(B) flighted(C) hold(D) floated
#3675311
相關試卷
114年 - 114-4 航海人員測驗_電技員:專業英文#133733
2025 年 · #133733