最新資料

硬式電路板製程概論

工具機機械設計概論

機械製圖(含工具機實例)

115年 - 115年度救生員資格檢定_第五章『船艇救援知識』﹕三、一般船艇（七人式、橡皮艇）#142006(15題)

115年 - 115年度救生員資格檢定_第四章『救援器材知識』﹕三、救生浮標#142004(8題)

115年 - 115年度救生員資格檢定_第五章『船艇救援知識』﹕一、機動船艇#142003(27題)

115年 - 115年度救生員資格檢定_第三章『急救知識』選擇題﹕二、脊椎損傷（水中救援）#142002(5題)

115年 - 115年度救生員資格檢定_第二章『徒手救援知識』選擇題﹕六、潛泳#142000(5題)

115年 - 115年度救生員資格檢定_第四章『救援器材知識』﹕二、長背板#141999(9題)

115年 - 115年度救生員資格檢定_第四章『救援器材知識』﹕一、拋繩救生#141998(22題)

115年 - 115年度救生員資格檢定_第二章『徒手救援知識』選擇題﹕五、潛水#141997(3題)

115年 - 115年度救生員資格檢定_第二章『徒手救援知識』選擇題﹕四、蛙鞋#141996(3題)

115年 - 115年度救生員資格檢定_第二章『徒手救援知識』選擇題﹕三、拖帶假人#141995(3題)

複選題40.有關總凱氏氮，下列敘述何者正確？ (A)總凱氏氮包括氨氮及無機氮 (B)總凱氏氮包括氨氮及有機氮 (C)檢測總凱氏氮需經過消化 (D)總凱氏氮包括氨氧、硝酸塩氮及亞硝酸塩氮

複選題39.下列何者為水中氯鹽之檢測方法？ (A)硝酸汞滴定法 (B)硝酸銀滴定法 (C)比色法 (D)塗抹法

複選題38.水中大腸桿菌分析結果之單位為何？ (A) ppb (B) ppm (C) CFU/100mL (D) MPN/100mL

第二題：請說明水質標準檢驗方法中標準品之特性。(每項 2 分)

(二)依【圖一】氮氣(N2)、有機氮(Organic N)、氨氮(NH3-N)、亞硝酸鹽氮(NO2--N)、硝酸鹽氮(NO3--N)的循環關係，請填入其需要的轉換機制名稱(A, B, C, D, E, F)分別為何？

(一)請說明地球氮循環的重要性。

食品化學-水分

講師：peter3610735

簡介：本章節針對水分的特性，分成四個章節，食品中的自由水、水活性與含水量的關係、水分與等溫吸濕曲線、玻璃轉...

國小高年級數學

講師：超強全服亥牙

簡介：教大家高年級數學的一些技巧

鐵路法重點整理

講師：j10118036a

簡介：法條枯燥乏味，若非本身有興趣或本科生，準備起來想必吃力無比。 本課程標示的重點，皆是考過的考點，搭配...

直接強制-1

描述：直接強制

直接強制-2

描述：直接強制

訴訟種類-廣威

描述：訴訟

2. 下列哪一種化合物在酸性二鉻酸鉀(K2Cr2O7)溶液中會被氧化成酮類？ (A) 2-甲基-1-丁醇 (B) 2-甲基 2-丁醇 (C) 2-戊醇 (D) 戊醛

33 最高限額抵押權之行使，以其所擔保債權之確定為前提。下列何者並非最高限額抵押權所擔保債權之確定方法？(A)約定之原債權確定期日屆至 (B)最高限額抵押權所擔保之債權消滅(C)最高限額抵押權人聲請裁定拍賣抵押物 (D)擔保債權所由發生之法律關係經終止

複選題20.(AB) erudite (AC) discernment (AD) mercenary (AE) navigate (BC) ruminated (BD) measurable (BE) subjugate (CD) judicious (CE) restraint (DE) periphery (ABC) atonement (ABD) weigh (ABE) normative (ACD) inculcated (ACE) lineage

複選題2.(AB)In doing so, it foregrounds the extent to which market logics may permeate domains previously insulated from economic valuation. (AC) This tension is further intensified by the global circulation of surrogacy arrangements, which often involve stark disparities in wealth and legal protections. (AD) Consequently, regulatory frameworks that prioritize transparency and protection over outright bans are frequently proposed as a pragmatic compromise. (AE)Such accounts, however, risk underestimating the degree to which individuals can exercise reflective agency even within constrained circumstances. (BC) This observation invites closer scrutiny of the conditions under which consent is produced, rather than assuming its legitimacy at face value. (BD) At the same time, framing surrogacy solely in terms of exploitation may inadvertently silence the voices of those who participate willingly. (BE)By reframing reproduction as a form of labor, this perspective unsettles deeply held intuitions about the moral boundaries of the market. (CD)As a result, the ethical evaluation of surrogacy cannot be disentangled from broader questions about justice, inequality, and global power relations.

複選題3.(AB)In doing so, it foregrounds the extent to which market logics may permeate domains previously insulated from economic valuation. (AC) This tension is further intensified by the global circulation of surrogacy arrangements, which often involve stark disparities in wealth and legal protections. (AD) Consequently, regulatory frameworks that prioritize transparency and protection over outright bans are frequently proposed as a pragmatic compromise. (AE)Such accounts, however, risk underestimating the degree to which individuals can exercise reflective agency even within constrained circumstances. (BC) This observation invites closer scrutiny of the conditions under which consent is produced, rather than assuming its legitimacy at face value. (BD) At the same time, framing surrogacy solely in terms of exploitation may inadvertently silence the voices of those who participate willingly. (BE)By reframing reproduction as a form of labor, this perspective unsettles deeply held intuitions about the moral boundaries of the market. (CD)As a result, the ethical evaluation of surrogacy cannot be disentangled from broader questions about justice, inequality, and global power relations.

貳、非選擇題第一題：【英翻中】        In 2023 the output value of bicycles and their components produced in Taiwan surpassed NT$200 billion, of which bike parts accounted for about 60%, with the amount in excess of NT$120 billion. Over the past decade Taiwan has continually been the top source country for imports of bicycle parts into the US and China and the second-ranked source country into the European Union. Such a large market share can be attributed to the fact that Taiwan’s bicycle parts industry, which is concentrated in Taichung and Changhua, is unparalleled in the world with a combination of its comprehensive supply chain, advanced technology, and high responsiveness to customer needs.【15 分】