10. For plane electromagnetic waves propagating in vacuum, which one of the following descriptions is incorrect? Here $\mathbf{k}$ is the wave vector, and $\mathbf{S}$ is the Poynting vector.
(A) $\mathbf{k} \perp \mathbf{E}$
(B) $\mathbf{S} \perp \mathbf{k}$
(C) $\mathbf{E} \perp \mathbf{H}$
(D) None of the above.

11. Consider a plane electromagnetic wave propagating in vacuum. The electric field is given by $\mathbf{E} = \mathbf{E}_0 e^{i(kx - \omega t)}$. The Poynting vector is labeled by $\mathbf{S}$. The intrinsic impedance $\eta$ (also called wave impedance) is $377\ \Omega$. The time-averaged Poynting vector $\langle S \rangle$ is $1\ \mathrm{W/m^2}$. Please calculate $E_0$, i.e., the amplitude of the electric field. Please choose the closest answer. (A) $54.2\ \mathrm{V/m}$ (B) $377\ \mathrm{V/m}$ (C) $19.4\ \mathrm{V/m}$ (D) $27.5\ \mathrm{V/m}$

12. Consider a plane electromagnetic wave expressed by its phasor form of $\mathbf{E} = \mathbf{E}_0 e^{i(k_x x + k_y y + k_z z)}$. The expression should satisfy the Helmholtz equation: $\nabla^2 \mathbf{E} + \omega^2 \mu \epsilon \mathbf{E} = 0$. As a result, which one of the following relations must be true? (A) $k_x + k_y + k_z = \omega \sqrt{\mu \epsilon}$ (B) $k_x^2 + k_y^2 + k_z^2 = \omega^2 \sqrt{\mu \epsilon}$ (C) $k_x^2 + k_y^2 + k_z^2 = \omega^2 \mu \epsilon$ (D) None of the above.

13. What is the short-circuit impedance measured at the input terminals of an infinitely long transmission line with the parameters of $(R = 45 \times 10^{-3}\ \Omega/\mathrm{m}, L = 27 \times 10^{-8}\ \mathrm{H/m}, G = 5 \times 10^{-5}\ \mathrm{S/m}, C = 3 \times 10^{-10}\ \mathrm{F/m})$ at $5\ \mathrm{GHz}$? (A) $30\ \Omega$ (B) $50\ \Omega$ (C) $75\ \Omega$ (D) None of the above. 

14. An 1-GHz voltage source $(V_{s})$ is applied to a short-circuit quarter-wavelength lossless transmission line as the figure shown below. The characteristic impedance of the transmission line is $20\Omega$. Please evaluate the current of $I_{x}$. (A) $0.25\mathrm{A}$ (B) $0.25\angle 90^{\circ}\mathrm{A}$ (C) $0.25\angle 270^{\circ}\mathrm{A}$ (D) None of the above.

15. Please select the closest dB value of the reflection coefficient of a $75 - \Omega$ resistive load in a $50 - \Omega$ system $Z_{0}$. (A) $-6.9\mathrm{dB}$ (B) $-13.9\mathrm{dB}$ (C) $-1.39\mathrm{dB}$ (D) None of the above.

16. A 5-V dc voltage with $25 - \Omega$ source resistance is applied at $t = 0$ to the input terminal of a $25 - \Omega$ terminated lossless coaxial of $30\mathrm{m}$ length as the figure below. The initial condition of voltage and current of the cable are $0\mathrm{V}$ and $0\mathrm{A}$. The dielectric constant $(\varepsilon_{\mathrm{r}})$ of the insulating material in the cable is 4, and the characteristic impedance of the cable $(Z_0)$ is $50\Omega$. Please select the closest voltage value at $V_{L}$ at 1s. (A) $5\mathrm{V}$ (B) $2.5\mathrm{V}$ (C) $7.5\mathrm{V}$ (D) None of the above.

17. A guided TE mode of frequency $15\mathrm{GHz}$ is excited and propagates in metallic waveguide filled with polyethylene, of which $\varepsilon_{r} = 2.25$. The waveguide is designed with dimensions $a = 2\mathrm{cm}$ (x axis) and $b = 1\mathrm{cm}$ (y axis). If the x component of its electric field is given by $$ E _ {x} = - 5 0 \cos (5 0 \pi x) \sin (1 0 0 \pi y) e ^ {- j \beta z} \mathrm {V / m} $$ Which of the following statements is NOT correct? (A) The mode number is $\mathrm{TE}_{11}$. (B) The guide wavelength is $1.33 \times 10^{-2} \mathrm{~m}$. (C) The cutoff frequency is smaller than $12\mathrm{GHz}$. (D) $E_{z}$ is zero. 

18. Which of the following modes is the dominant mode in an air-filled metallic rectangular resonator for $a > b > d$? where $a, b,$ and $d$ are the dimensions in the x-, y-, and z-directions in respective, and the mode number are $m, n,$ and $p$ accordingly. Hint: Here we choose z-axis as the reference "the longitudinal direction" to define TE modes $(E_z = 0)$ and TM modes $(H_z = 0)$.  (A) $\mathrm{TM}_{110}$ (B) $\mathrm{TM}_{101}$ (C) $\mathrm{TE}_{101}$ (D) $\mathrm{TE}_{011}$

19. A parallel-plate waveguide made of perfectly conducting plates spaced $3\mathrm{cm}$ apart by polyethylene, $\varepsilon_{r} = 2.25$, is operated at frequency of $12\mathrm{GHz}$. Without considering the fringing effect on edges, which of the following supported modes has faster group velocity than others: (A) $\mathrm{TE}_3$ (B) $\mathrm{TM}_2$ (C) $\mathrm{TE}_1$ (D) TEM

20. An engineer intends to design a cubic cavity with side lengths $a = b = d = 25 \mathrm{~mm}$. To achieve the highest possible Q factor, he is evaluating three candidate materials—copper, aluminum, and silver—with electrical conductivities of $\sigma = 5.8 \times 10^{7} \mathrm{~S} / \mathrm{m}, \sigma = 3.5 \times 10^{7} \mathrm{~S} / \mathrm{m}, \sigma = 6.2 \times 10^{7} \mathrm{~S} / \mathrm{m}$, respectively. Which material should be chosen when only conductivity is considered: (A) Copper (B) Aluminum (C) Silver (D) All have the same Q factor. 

115年 - 115 台灣聯合大學系統_碩士班招生考試_電機類：電磁學#139672

114年 - 114 台灣聯合大學系統_碩士班招生考試試題_電機類：電磁學#138442

113年 - 113 台灣聯合大學系統_碩士班招生考試試題_電機類：電磁學#138444

112年 - [無官方正解]112 台灣聯合大學系統_碩士班招生考試試題_電機類：電磁學#138446

111年 - 111 台灣聯合大學系統_碩士班招生考試試題_電機類：電磁學#138448

110年 - [非官方正解]110 國立臺灣大學_碩士班招生考試_電信工程研究所甲組:電磁學及電磁波#113085

110年 - 110 國立臺灣科技大學_碩士班招生試題_電子工程系(丙組)：電磁學#112842

110年 - 110 國立臺灣科技大學_碩士班招生試題_光電工程系：電磁學#111696

110年 - 110 國立臺北科技大學_碩士班招生考試_光電工程系碩士班：電磁學#108271

110年 - [非官方正解]110台灣聯合大學系統_碩士班招生考試_電機類:電磁學#105808