阿摩線上測驗
登入
首頁
> 最新資料
最新資料
瀏覽最新的試卷、試題和詳解,掌握最新考試資訊
最新科目
二技統測◆農業經營類◆(二)農業經營
二技統測◆傳播類◆(二)傳播與社會
二技統測◆林產加工類◆(二)木材性質
最新試卷
115年 - 115 國立臺北大學_碩士班一般入學考試試題_歷史學系:臺灣通史#147170(6題)
115年 - [非官方正解]115 國立臺北大學_碩士班一般入學考試試題_資訊管理研究所:計算機概論#147163(15題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_中國文學系:國文#147153(5題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_中國文學系:中國文學史#147141(4題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_中國文學系:中國思想史#147138(8題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_資訊管理研究所:管理資訊系統#147131(16題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_國際企業研究所:統計學#147120(18題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_經濟學系:總體經濟學#147107(13題)
115年 - [無官方正解]115 國立臺北大學_碩士班一般入學考試試題_會計學系:審計學#147105(26題)
115年 - 115 國立臺北大學_碩士班一般入學考試試題_統計學系:統計學#147104(20題)
最新試題
4. A company has developed a linear trend regression model based on 16 quarters of data. The independent variable is the measure of time (t = 1 thru 16 where quarter 1 is winter quarter, 2 is spring, etc.). The company has also developed seasonal indexes for each quarter as follows: The linear trend forecast equation is: $\hat{y} = 120 + 56t$. Given this information, what is the seasonally adjusted forecast for period 19? (A) 1,064 (B) 1,184 (C) 828.80 (D) 986.7
3. Which of the following forecasting methods allows the decision maker to weigh the past time series differently to make the model more sensitive to more recent data? (A) Exponential smoothing (B) Linear trend regression model (C) Moving average model (D) De-seasonalizing the time series
2. In a simple exponential smoothing model, which of the following statements is true? (A) The forecast values are determined by computing a moving average of the previous 4 data periods if we are working with quarterly data. (B) The larger the smoothing constant, the more smoothing that takes place in the model. (C) If the data contain a lot of random or irregular ups and downs, then a larger smoothing constant should be used in an attempt to model these fluctuations. (D) More smoothing of the data will take place if a smoothing constant value close to zero is used.
最新申論題
6. [15%] Two groups of people are surveyed. In a sample of 55 drivers who are single people, they drive, on average, 79 miles per week for trips. In a sample of 70 married people, they drive, on average, 67 miles per week for trips. The sample standard deviations are 16 and 8 miles, respectively. At α = 0.01, can it be concluded that single people do more driving for trips than married people? Explain your answer in details.
(c) Find the probability that 2 women and 1 man are hired.
(b) Find the probability that no women are hired.
最新課程
高普考/三四等/高員級法學知識(中華民國憲法、法學緒論):43章依考點系統整理,單元重點搭配試題練習
講師:
MoAI - 您的AI助手
簡介:
本課程適合準備高普考、三四等特考及高員級考試,需要應考法學知識(包括中華民國憲法、法學緒論)的考生。...
永續發展基礎能力:29章依考點系統整理,從ESG、氣候科學到永續金融與揭露規範
講師:
MoAI - 您的AI助手
簡介:
本課程適合準備「永續發展基礎能力」測驗的考生,以及想有系統地認識ESG、氣候變遷與永續金融規範的企業與...
升官等警正◆行政法|依考點系統整理十九章重點
講師:
MoAI - 您的AI助手
簡介:
本課程適合準備升官等警正考試、需要系統複習行政法的考生,也適合想把零散觀念依考點重新整理的在職同仁。...
最新主題筆記
APTT試劑與接觸活化
課程:
臨床血液學與血庫學|39章依考點系統整理,從造血、凝血到輸血的單元重點與對應試題
章節:
第 28 章 凝血檢驗的前處理與結果整合
描述:
學習重點 APTT(activated partial thromboplastin time,活化部分凝血活酶時間)主要評估內在性凝血路徑...
APTT與PT的原理及異常鑑別
課程:
臨床血液學與血庫學|39章依考點系統整理,從造血、凝血到輸血的單元重點與對應試題
章節:
第 28 章 凝血檢驗的前處理與結果整合
描述:
學習重點 APTT 與 PT 的評估範圍:APTT 主要評估內因性凝血路徑及共同凝血路徑;PT 主要評估外因性凝血路...
凝血篩檢、特殊檢驗選擇與檢驗敏感度
課程:
臨床血液學與血庫學|39章依考點系統整理,從造血、凝血到輸血的單元重點與對應試題
章節:
第 28 章 凝血檢驗的前處理與結果整合
描述:
學習重點 先建立檢驗對應關係:APTT主要反映內在性凝血路徑及共同路徑,PT/INR主要反映外在性凝血路徑及...
最新討論
11 在許多軟式散光隱形眼鏡設計中,針對動態穩定(dynamic stabilization)設計, 下列敘述何者錯誤? (A)是目前最常使用的設計 (B)主要是依賴上下眼皮眨眼時的力道 (C)因無特別加厚區,所以鏡片透氧度沒有減少 (D)比較容易受地心引力的影響
12 一個病人屈光矯正的散光軸在 170 度,使用記號標記在 0 度和 180 度的隱形眼鏡試片,戴上試片後 記號顯示正好在 170 度,處方鏡片之角度應為何? (A) 170 度 (B) 180 度 (C) 10 度 (D) 90 度
43 小李向檢察官提起告訴,說小明在公車上偷他的錢包,事後經檢察官起訴,下列敘述何者錯誤? (A)小明受訊問時,可保持緘默 (B)因為小明在檢察官偵訊時已承認竊盜犯行,因此就算沒有其他證明小明有偷東西的證據,仍可認定小明有罪 (C)若僅有小李指訴小明有竊盜行為,但無其他補強證據,仍不能認定小明犯罪 (D)小明否認偷小李的錢包,但因公車監視錄影錄到小明偷錢過程,故可認定小明有罪
44 下列何者非屬刑法第 10 條第 2 項規定之公務員? (A)直轄市市長 (B)郵差 (C)警察 (D)於監獄擔任崗哨之替代役
45 警察甲於調查乙涉嫌強盜案件中,經約談目擊證人丙後,發現丙所述有刻意避重就輕並有維護乙之情形, 於是警告丙若不據實陳述,將會以丙涉嫌湮滅罪證偵辦,丙因不滿甲之言詞,而向地方檢察署提出告訴,下列關於甲之行為是否成罪之敘述,何者正確? (A)甲成立恐嚇危害安全罪 (B)甲成立濫權追訴罪 (C)甲不成立犯罪 (D)甲成立犯罪,但其行為情堪憫恕得減輕其刑
65. 可讀到 0.05mm 的游標卡尺,本尺刻度 1 格 1mm,游標副尺之零刻度在本尺 13mm 至 14mm 間,游尺第 9 條刻度線吻合本尺刻度,則工件尺度是______ mm。(A)13.40 (B)13.45 (C)14.09 (D)14.45