46. A small AC generator is used to power motion sensors on a treadmill. The generator coil rotates in a uniform magnetic field and must produce an emf of 373 V. How many turns of wire are required? (Given: Magnetic field B = 0.60 T, Coil area A = 0.15 m², Rotation frequency f = 60.0 Hz)
(A) 8
(B) 11
(C) 14
(D) 17
(E) 20

47. When operating on a 120-V circuit, an electric heater receives 1.30 × 10³ W of power, a toaster receives 1.00 × 10³ W, and an electric oven receives 1.54 × 10³ W. If all three appliances are connected in parallel on a 120-V circuit and turned on, what is the total current drawn from an external source? (A) 24.0 A (B) 32.0 A (C) 40.0 A (D) 48.0 A (E) none of the above

48. As shown in the figure, three charged particles (1, 2, and 3) are positioned along an x-axis. Particles 1 and 2 are fixed in place. Particle 3 is free to move, but the net electrostatic force exerted on it by Particles 1 and 2 happens to be zero. Given that the distance between Particles 1 and 2 is L₁₂, the distance between Particles 2 and 3 is L₂₃, and they satisfy the relationship L₁₂ = 2 L₂₃. What is the ratio of the charges q₁/q₂?(A) 4 (B) -4 (C) 9 (D) -9 (E) -8

49. A parallel-plate capacitor has an initial capacitance of C₀ = 6 μF. The capacitor is first connected to a 100 V battery until fully charged and then disconnected from the power source. A dielectric slab with a dielectric constant κ = 3 is then inserted symmetrically between the plates. The thickness of the slab is exactly half of the plate separation distance. What is the external work involved in the process of inserting the dielectric slab? (A) 10 mJ (B) -10 mJ (C) 15 mJ (D) -15 mJ (E) 0

50. In two LRC series AC circuits, suppose circuit 1 has R₁ = 60 Ω, C₁ = 300 μF, L₁ = 0.80 H and circuit 2 has R₂ = 120 Ω, C₂ = 600 μF, L₂ = 1.60 H. Find the ratio of , where f₁ and f₂ are the resonance frequencies of circuits 1 and 2, respectively. (A) (B) (C) 1 (D)(E) 2

51. A long solenoid has 5000 turns per meter and a cross-sectional area of 2.0×10⁻⁴ m². A larger secondary coil with 500 turns, which has a cross-sectional area of 5.0×10⁻⁴ m², and a total resistance of 2π Ω is placed outside and coaxial with the central part of the solenoid. The current in the solenoid drops uniformly from 4.0 A to 0 A in a time interval of Δt = 0.1 s. What is the magnitude of the induced current in the external coil during this time interval? (Given: permeability constant μ₀ = 4π × 10⁻⁷ T·m/A) (A) 4.0 mA (B) 5.0 mA (C) 6.0 mA (D) 7.0 mA (E) 8.0 mA

52. A wire is bent into a three-quarter circular loop of radius R and carries a steady current I. It is placed in a uniform magnetic field perpendicular to the plane of the three-quarter circular loop. The magnitude of net magnetic force on the wire is ______. (A) 0 (B) πRIB (C) 2RIB (D) (3/4)πRIB (E) √2 RIB

53. A circular coil 0.05 m in radius, with 50 turns of wire, lies on a horizontal plane. It carries a counterclockwise current of 8.0 A. The coil is in a uniform 1.50 T magnetic field directed toward the +Y direction. Find the torque on the coil. (Given: Unit vectors î, ĵ and k̂ point in the directions of the positive X-, Y- and Z- axes and have magnitude of 1) (A) -0.03 π î (B) -1.50 π î (C) 0.03 π k̂ (D) 1.5 π k̂ (E) 0.03 π ĵ

54. A beam of monochromatic light with a wavelength of λ = 600 nm is incident perpendicularly onto a diffraction grating with 500 lines/mm. What is the maximum diffraction order (m) that can be observed on the screen? (Note: Consider only the orders on one side of the central maximum, excluding m = 0) (A) 1 (B) 2 (C) 3 (D) 4 (E) 5

55. Alice directs a beam of 0.12 nm x rays at certain planes of a silicon crystal. As she increases the angle of incidence of the beam from zero, the first strong interference maximum occurs when the beam makes an angle of θ = tan⁻¹() with the planes. How far apart are the planes? (A) 0.045 nm (B) 0.075 nm (C) 0.1 nm (D) 0.15 nm (E) 0.2 nm

56. A rectangular conducting loop with resistance R lies in the same plane as a long straight wire carrying a steady current i. The nearest edge of the loop is initially at a distance a from the wire, and the loop has the width w and length L as shown in the figure. The loop is then pulled directly away from the wire with constant speed v. As the motion just begins, the induced current in the loop is ______. (Given: permeability constant μ₀) (A)(B) (C) (D) (E)

115年 - 115 國立中山大學_學士後醫學系招生考試試題：物理與化學#138404

115年 - 115 學士後醫學系招生考試試題：物理及化學#138377

115年 - 115 國立清華大學_學士後醫學系招生考試試題_學士後醫學系：化學與物理#138209

114年 - 114 學士後醫學系招生考試試題：物理及化學#126679

114年 - 114 國立清華大學_學士後醫學系_自然科學組﹕物理化學#126266

114年 - 114 國立中山大學_學士後醫學系招生考試試題：物理與化學#126239

113年 - 113 國立清華大學_學士後醫學系單招試題_學士後醫學系自然科學組：化學與物理#119930

113年 - 113 學士後醫學系招生考試:物理及化學#119747

113年 - 113 國立中山大學_學士後醫學系招生考試：物理及化學#119273

112年 - 112 學士後醫學系招生考試:物理及化學#114227